As a purchaser, you must not be unfamiliar with Ethernet connectors and cables, because in our work, we often encounter the procurement of these products, so know what to pay attention to when purchasing Ethernet connectors and cables Well, the following Dosin hardware and electronic engineers will come to popularize the tips that must be mastered in the purchase of Ethernet connectors and cables.
The demand for higher data communication speed is the driving force for the evolution of Ethernet from 10MB/s to 10GB/s bit rate, and the ideal solution is to use cables and cables that meet the data speed requirements of IT networks. connector products, therefore, be sure to keep these considerations in mind when purchasing Ethernet connectors and cables, as follows:
In addition to the need for high data transfer speeds, another impetus for expanding the use of Gigabit Ethernet is to reduce capital investment costs, not having a separate redundant network, but instead having a shared data communication system across IT and automation. But automation environments have different cabling requirements than IT environments, the type of connectors and cables used may not be robust enough for the application, and in order to successfully merge the two networks, passive component requirements on both sides need to be considered.
Cables and connectors are required to be selected to provide the robustness, flexibility, and ease of assembly required by the application, an approach that allows the resulting network to combine applications in a cost-saving, speed- and efficiency-enhancing manner. The resulting flexibility also enables the system to keep up with changing automation needs and increasing data rates. CAT5 cables and connectors are only suitable for lower Ethernet data rates, CAT6 hardware becomes a necessity for gigabit ethernet, and at gigabit ethernet speeds, the cable and connector interface cannot be considered a lumped element, but must be treated as a for the transmission line.
At a finer level, the effects of cable and connector capacitance can degrade the signal performance of the system, and excessive capacitive loading can cause impedance mismatches, signal reflections, and distortion on the transmission line. Using cables and connectors with minimal wire-to-wire and wire-to-ground capacitance will help ensure an acceptable amount of signal distortion. But not all 8-wire cables are suitable for GB Ethernet. Jacket material, core construction, agency ratings, shielding, environmental ratings, etc. are all important considerations when selecting the correct cable for the application. Many 8-wire Ethernet Cables are only suitable for CAT5 applications and may or may not have the ratings and gauges you need.
For a buyer, it is important to keep these considerations in mind when purchasing Ethernet connectors and cables, if you do not want to put the connector on the wrong cable, you should choose both Ethernet cables and connectors to ensure compatibility. sex. For example, if a shielded cable is required, you need to ensure that the shield continues through the connector, i.e. the connector termination must be compatible with the cable.
After reading the above, you should be very clear about the "shopping tips for Ethernet connectors and cables". If you want to know more about the purchase knowledge of Ethernet connectors and cables, the Dosin operation team will continue to edit and publish Share with you on the news channel. Dosin Hardware Electronics, a professional manufacturer of Ethernet rj45 connectors and cables, has established a good reputation in the market with 17 years of technical precipitation.