Exterior Car Magnet Antenna (Shark Fin Style) w/SMA connector | 311216
Contact Sales
Your Name* | |
Your Email* | |
Topic* | |
Qty | |
Message | |
SUBMIT |
- Description
Product Description
Vehicle Exterior Magnet Antenna (Shark Fin Style) with SMA connector | weBoost 311216 by Wilson Electronics.
SMA version exterior magnet mount antenna with SMA connector is designed to work with weBoost Drive X and weBoost Drive 4G-X series car and truck cell phone signal booster kits. It works with all other brand vehicle cellular amplifier kits that require SMA connector. It is a multi-directional wide-band antenna. It offers high efficiency and compact 3.4-inch design. It is capable of receiving cell signal from towers at extended range. This Drive Magnetic Outside Antenna has strong magnetic base. It features four cable-exit points that allows for quick installation and clean cable routing through a hatchback or side door. It is also equipped with a 10 inch length of low-loss antenna cable with SMA Connector (to fit Drive X and 4G-X).
Features at a Glance:
- Stylish, modern shark-fin design complements vehicle aesthetics.
- Strong magnetic base for easy, secure placement.
- 4 cable-exit points to ensure better cable routing.
- Compact 3.4 inches shark-fin design.
- SMB connector to fit Drive X and other kits requiring SMA connectivity.
- Durable all-weather construction repels rain, snow, wind, and heat Uplink / Downlink.
- 5G-ready; works on every network and compatible with all U.S. carriers.
- Works on all worldwide cellular bands for voice and data: LTE/ CDMA/ GSM/ UMTS/ AWS.
- High performance for weBoost cellular repeater/ boosters or other brand kits.
- Designed for use on all type vehicles such as cars, vans, pick-up trucks, 18 wheelers, buses, RVs, etc.
- High efficiency and compact design.
- Rugged and waterproof for all weather operation.
- Simple magnetic mount installation.
- Best performance for its size.
Package Includes:
- Drive Magnet Outside Antenna.
- Antenna attached 10 ft. cable.
- Cable attached SMA connector.
- Adhesive Disk for non-magnet attracting composite vehicle roofs.
How does it work?
- Outside antenna (this purchase) pulls in cell signal from the closest tower.
- Cell signal booster (not included with this purchase) amplifies the signal received by outside antenna.
- Inside antenna (not included with this purchase) distributes this new signal throughout vehicle.
Installation:
Identify a location on the top of your vehicle that is near the center of the roof. Place atleast 12 inches away from any other antennas and from any windows (including sunroof). Clean the surface where you will place the outside antenna. Mount the outside antenna by placing on top of vehicle. NOTE: For aluminum roofs, use the included adhesive disk to secure outside antenna in place.
How can the cable can be routed with different vehicles?
The cable is strong enough that it may be shut in most vehicle doors without damaging the cable.
- Car/ Sedan: Cable routed into rear side door.
- SUV/ Van/ Hatchback: Cable routed into top of hatchback door.
- Truck: Cable routed into side door.
NOTE: When going through car wash, remember to remove your antenna.
- Works on all worldwide cellular bands for voice and 4G data: LTE/ CDMA/ GSM/ UMTS/ AWS.
- High performance for all cellular repeaters and boosters.
- Supports 4G LTE, 3G & 2G.
- Designed for exterior vehicle installation.
- High efficiency & compact low profile design that blends into any vehicle type.
- Rugged & waterproof for all weather operation.
- Simple install.
- Ground plane independent.
- Included 10 ft. LMR-100 cable terminates in a SMA Connector.
- 2-year warranty.
Highlights:
- Covers all 4G 700 - 2700MHz cellular frequencies All modes, voice and data.
- All M2M applications.
- High gain signal output surpasses others this size.
- Install instantly on any steel surface (required) or use adhesive disk to adhere.
- Portable, and easy to store.
- Outdoor rated waterproof.
- Great for cars and trucks.
- Connects to all cellular boosters and modems with SMA male connector.
- Assembled in USA.
Specifications:
Model | 311216 |
---|---|
Frequency Band (MHz) | 798-806 | 806-960 | 1710-1880 | 1900-2200 | 2200-2700 |
Peak Gain (dBi) | 0.5 | 1.1 | .80 | .41 | .77 |
Efficiency (%) | 50 | 45 | 30.6 | 27.8 | 28.5 |
VSWR | <2:1 |
Polarization | Vertical |
Half-Power Azimuth Beamwidth (Degrees) | 63.1 | 44 | 29.6 | 31.7 | 30.4 |
Radiation Pattern | Omni-Directional |
Impedance (Ohm) | 50 |
Maximum Power (W) | 50 |
Cable Length (Feet) | 10 |
Connector | SMA Female |
Water Resistance | IPX Weather Rated |
Substance Compliance | RoHS |
OD Dimensions (in / mm) | 1.96 / 50 |
Height Dimensions (in / mm) | 3.39 / 86.2 |
Shipping Dimensions (in / mm) | 5.25 x 2 x 7.5 / 133.3 x 50.8 x 190.5 |
Antenna weight (lb / kg) | .24 / .11 |
Packing weight (lb / kg) | .24 / .11 |
Radiator Material | PCB |
Radome Material | Polycarbonate |
UPC | 810005 961271 |
Radiating Pattern | Data Sheet with Radiation Patterns |
- Reviews (23)
-
comment
- All(23)
- Q & A
-
: Where is the origin of Elecbee products? Are they certificated?2023-03-03
-
Answer:
Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.
2023-03-03
-
: What forms of payment do you accept?2023-03-03
-
Answer:
Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.
2023-03-03
-
: When will you arrange shipment?2023-03-03
-
Answer:
After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.
2023-03-03
-
: How to exchange or return?2023-03-03
-
Answer:
1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.
2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;
3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.
2023-03-03
Related Products
EB-201-2391
EB-201-2406