SureCall's wide band Omni-directional short fiberglass antenna with an average 2-4 dB gain over both main bandwidths and an F-Female type of connector. It has an exact range of ;698 - 960 MHz and 1700 - 2700 MHz.
The Gain on 698-960 MHz bandwidth is 2 to 3 dBi. The Gain on 1700 to 2700 MHz bandwidth is 3-4 dBi. It is shipped with a mounting kit for convenience purposes while mounting. It has an impedance of 75 Ohm. Being Omni-directional it easily collects signals from various cell towers in the process boosting different carrier’s signals.
SureCall SC289W or CM289W, which comes with a mounting kit is a roof or wall mount antenna best for marine, RV or urban downtown installations. Fibreglass built, the casing covers such systems as WLAN, 4G, 3G and 2G for LTE, AWS, PCS and Cellular frequencies.
This antenna is also omni-directional, a property that gives it the ability to collect signals generally from different sides; you needn’t point it to any particular tower to work. Antenna's range stands at about 50 miles from an unobstructed tower. Apart from the antenna, other parts that come with it include mounting equipment for a wall or horizontal flat surface.
For best results mount it upright. SureCall SC289-W or Cellphone-Mate CM289-W is compatible with a number of cables and amplifiers from SureCall, such as 4G boosters, RV boosters, accelerator kits, SOHO series of boosters, low coax cables as well as all in-building series of amplifiers on 75 Ohm system. It is very easy to install, full band and weather resistantant in its outside use with F-Female connector type.
Surecall Omni Antenna with bandwidth frequency coverage of 698-2700 MHz is a ceiling or wall mount Omnidirectional Antenna with F-female termination. With 100 watts of power, full band omni-directional 75 ohm, this fiberglass antenna provides excellent signal boosting for cellular and wireless connectivity, providing 2 to 4 db Antenna Reception Gain. The antenna includes a mounting kit, and can be set on walls or roofs. It is ideal for downtown settings, RVs, or marine installations, where signal strength is already reasonable at 3+ bars.
The Omni-directional antenna gathers signal from all sides, and does not need to be pointed at a cellular tower. It is easy to install, and weather resistant. Connectivity begins here. Omni-Directional Antenna - Full Band Fiberglass Antenna (SureCall SC289W/ Cellphone-Mate CM289W). UPC: 857593005574.
From the manufacturer:
Summary.
- Outside use.
- Omni-directional.
- 2-4 dB Gain.
- 2G, 3G, 4G, WLAN.
- Full-band.
- Weather resistant.
- Easy to install.
Overview.
This wall or roof mount antenna is ideal for downtown urban settings, RVs or marine installations. It is built with a strong fiberglass casing and is designed to cover 2G/ 3G/ 4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies.
Cellphone-Mate CM289W or SureCall SC289W full band fiber-glass antenna is an omni-directional antenna that gathers signals from all sides and does not need to be pointed toward a cellular tower. Range of antenna is approximately 50 miles to, and from cellular towers (free of obstructions). Besides the antenna itself, parts includes mounting equipment for either a flat horizontal surface or a wall. It should be mounted in an upright position for best results. It is comparable to weBoost 311201 omni 75 Ohm antenna by Wilson Electronics.
Specifications.
Frequency. | 698-960/1700-2700MHz. |
---|
Input Impedance. | 75 ohm. |
---|
Operating Temperature. | -22° F Degrees to +176° Degrees. |
---|
Antenna Gain. | +2-4 dB. |
---|
Beamwidth. | E:72 H:92/ E:50 H:80. |
---|
VSWR. | ≤1.8. |
---|
Polarization Type. | Vertical. |
---|
Radiation. | Omni-directional. |
---|
Maximum Power. | 100 Watts. |
---|
Connector type. | F-Female or customized. |
---|
Cable type. | SC-RG6 or SC-RG11 recommended. |
---|
Fits | 75 Ohm cables with F-Male connector such as Type RG-6 cable with F Male connectors or Type RG-11 cable with F Male connectors |
---|
Height (inches). | 8.5. |
---|
Diameter (inches). | 2.63. |
---|
Weight. | 1 pound. |
---|
Mount. | Mount on the roof or side of roof / wall. |
---|
Ground Plane. | Built-in ground plane. |
---|
Color. | White. |
---|
Dimensions (inches). | 9.5" x 3.9". |
---|
Material. | Fiberglass. |
---|
This SureCall CM289W/ SC289W fiberglass antenna is a omni-directional antenna designed to cover 360° for 2G/ 3G/ 4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies. It is a high gain indoor antenna suited for places where the signal needs to be broadcast over a central area or space. This vertical mount antenna transmits and receives signal to cell phones.
OUTSIDE ANTENNA INSTALLATION OF CM289W OMNI ANTENNA:
Sure Call CM-289W/ SC-289W full-band antenna is an omni-directional outside antenna designed to cover 360° for 2G/ 3G/ 4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies. It is a high gain outside antenna suited for places where the signal needs to be broadcast over a central area or space. This outside vertical mount antenna transmits and receives signal to cell phones up to 50 miles from a cell tower.
Installation Steps:
- Unscrew antenna from L-mounting bracket on antenna base with hands, or wrench if needed.
- Find corner of house with strongest cell signal. To measure your existing cell signal on an Apple iOS Smartphone, dial *3001#12345#*and press Call. In the top-left corner, a number appears instead of bars. For Android devices, you can download several apps to measure exact signal strength. Look up check real signal strength to find a cell signal measurement app.
- Using vertical plate of bracket, mark position of desired location.
- Unscrew nut, lock washer, regular on end of stucco screws (2) and remove them.
- Place vertical plate into desired location and tap the screws, head first, along with sleeve into ½” to ¾”stucco wall.
- In this order, place washer, lock washer and nut on each screw and tighten until secure. When tightening screw, sleeve will expand to secure plate.
- Screw antenna securely back onto horizontal plate.
- Hand tighten cable to one end of antenna connector and the other end of cable to signal booster connector marked OUTSIDE.
Note: If desired surface for installation plate is wood or concrete, wood or masonry screws for L-plate will have to be purchased separately.