Omni Directional Exterior Building 2G/ 3G/ 4G LTE Antenna (50 Ohm)

Omni Antenna with bandwidth frequency coverage of 698-2700 MHz is a roof mount Omnidirectional Antenna with 3dBi gain and N-female termination. With 100 watts of power, full band omni-directional 50 ohm fiberglass antenna provides excellent signal boosting for cellular and wireless connectivity, providing 3 to 4 db Gain. This weather-proof winterized antenna purchase includes a mounting kit, and can be set on walls or roofs. It is ideal for downtown settings, RVs, or marine installations, where signal strength is already reasonable at 3+ bars.

The Omni-directional antenna gathers signal from all sides, and does not need to be pointed at a cellular tower. It is easy to install, and weather resistant. Connectivity begins here.

Omni antenna like this is used as an exterior building antenna with 50 Ohm outside antenna port cell phone signal booster kits such as SureCall Fusion5x, Fusion5s, Force5, and Fusion Professional.

4G Omni Directional Exterior Building or Home Wide Band 2G/ 3G/ 4G LTE Antenna (50 Ohm).

Summary:

3G/4G Omni Outdoor Antenna is a very popular Omni-Directional antenna because it is high performing outdoor building antenna system featuring a weather-proof design and covers a wideband frequency range of 2G, 3G, 4G LTE from 698 through 960 Mhz and 1710 through 2700 MHz boosting signals on 50 ohm system. Its installation is easy and multi-band antenna boasts coverage for all Carriers in USA and Canada including 4G LTE Plus / Advanced and AWS frequency bands. It features vertical polarization and a maximum of 4 decibels gain. It features N-Female connector at the base that can be used with standard RG-6 cables. It is made to collect signals from all directions, and from all cellular service providers regardless of whether 2G, 3G, 4G, or LTE.

The mounting hardware included enables antenna to be placed in vertical direction on a pole thereby improving the signal between the nearest cell tower and amplifier. This omni-directional antenna is a perfect choice if you have an existing strong cell signal outside the building or for boosting multiple carriers with cell towers located in opposite directions. The MSRP of this omni-directional antenna is $79.95.

Overview.

This omni-directional antenna is a popular choice for installation outdoors. It is compatible with 50 ohm amplifiers and accessories.

Installation Guide:

Mount antenna vertically in unobstructed and elevated areas such as roof or outside wall that is high. It is helpful to locate the nearest cell tower of your carrier and the antenna must be mounted closest to the cell tower. For an optimal installation of an antenna outside, it can be placed in line with the cell tower.

Technical Specifications:

• Frequency: 698 - 960 / 1700 - 2700 MHz.
• Impedance: 50 ohms.
• Max power: 100 watts.
• Radiation: Omni.
• Polarization: Vertical.
• Connector: N-Female.
• Beamwidth horizontal plane: 360 degrees.
• Beamwidth vertical plane: 75 degrees.
• VSWR: 1:8:1.
• Lightning Protection: Ground DC.
• Length: 10.2 inches.
• Thickness: 2.5 inches.

Kit Includes:

• Multi-band 50 ohm Omnidirectional Antenna.
• Mounting hardware.

Detailed Summary:

• Designed to be mounted outside of a building.
• High gain.
• Built-in ground plane.
• Omni-directional antenna.
• Easy and quick installation.
• Resistant to weather with tough ABS material and tested to withstand wind speed of 60 miles per hour.
• UPC: 682962482218.
• Improves the transmission of cell phone signal between the amplifier and the nearby cell tower.
• Designed for fixed installations.
• Comes with mounting hardware that is necessary for installation

From the manufacturer:

Summary:

• Outside use.
• Omni-directional.
• 3-4 dB Gain.
• 2G, 3G, 4G, WLAN.
• Full-band.
• Weather resistant.
• Easy to install.

It should be mounted in an upright position for best results.

It is compatible with all cell phone signal amplifiers operating on 50 ohm impedance.

Cable compatibility: LOW Coax Cables WITH Type N-MALE ON EITHER side. Fits Type 400 Cable with N-Male Connector.

Specifications.

Installation Steps:

1. Unscrew antenna from L-mounting bracket on antenna base with hands, or wrench if needed.
2. Find corner of house with strongest cell signal. To measure your existing cell signal on an Apple iOS devices, dial *3001#12345#*and press Call. In the top-left corner, a number appears instead of bars. For Android devices, you can download several apps to measure exact signal strength. Look up check real signal strength to find a cell signal measurement app.
3. Using vertical plate of bracket, mark position of desired location.
4. Unscrew nut, lock washer, regular on end of stucco screws (2) and remove them.
5. Place vertical plate into desired location and tap the screws, head first, along with sleeve into ½” to ¾” stucco wall.
6. In this order, place washer, lock washer and nut on each screw and tighten until secure. When tightening screw, sleeve will expand to secure plate.
7. Screw antenna securely back onto horizontal plate.
8. Hand tighten cable to one end of antenna connector and the other end of cable to signal booster connector marked OUTSIDE.

Note: If desired surface for installation plate is wood or concrete, wood or masonry screws for L-plate will have to be purchased separately.