Core2 ESP32 with Touch Screen Development Board Kit WiFi bluetooth Graphical Programming WiFi BLE IoT for Arduino

Core2 ESP32 with Touch Screen Development Board Kit WiFi bluetooth Graphical Programming WiFi BLE IoT for Arduino

Name: Core2 ESP32 with Touch Screen Development Board Kit WiFi bluetooth Graphical Programming WiFi BLE IoT for Arduino
Brand: Elecbee
SKU: EB0041462
Price: 59.99 USD
Availability: InStock
Rating: 138 / 29 (29 reviews)

$59.99

SKU: EB0041462

Copy to clipboard

80 Sales

29 reviews

In Stock Availability

Bulk Purchase, Auto Savings:

$56.99

10-19 PCS

$51.29

20-99 PCS

$41.03

100+ PCS

Deliver to United States

Flat Shipping Rate $10.00

- +

Contact Sales

Core2 ESP32 with Touch Screen Development Board Kit WiFi bluetooth Graphical Programming WiFi BLE IoT for Arduino

EB0041462

Your Name*
Your Email*
Topic*
Qty
Message	Message
SUBMIT

Pay with Ease

Trusted Delivery

Mobile

Description

Precise details:

Description：

M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores.

The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. WiFi and Bluetooth are supported as standard and it includes an on board 16MB Flash and 8MB PSRAM, USB TYPE-C interface for charging, downloading of programs and serial communication, a 2.0-inch integrated capacitive touch screen, and a built-in vibration motor.

M5Core2 also features a built-in RTC module which can provide accurate timing. The power supply is managed by an AXP192 power management chip, which can effectively control the power consumption of the base and a built-in green LED power indicator helps to notify the user of battery level. The battery capacity has been upgraded to 390mAh, which can power the core for much longer than the previous model.

The M5Core2 retains the SD card slot and speakers. However, in order to ensure higher quality sound output, the I2S digital audio interface power amplifier chip is used to effectively prevent signal distortion. There are independent power and reset buttons on the left side and bottom of the base.

The 3 icons on the front of the screen are capacitive buttons which are programmable. There is a small expansion board on the back of the base with a 6-axis IMU sensor and microphone. The development platform and programming language supported by M5Stack Core2: Arduino, UIFlow (using Blockly, MicroPython language) No matter what level of your development and programming skills, M5Stack will help You gradually turn your ideas into reality.

Power on/off:

Power on: click the power button

Power off: press the power button for 6s

Restart: Click the RST button at the bottom

Package Included:

1x M5Stack Core2

1x Type-C USB(20cm)

Applications

Internet of things terminal controller

Stem education product

DIY creation

Smart home equipment

EasyLoader:

EasyLoader is a concise and fast program writer, which has a built-if program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. (M5StickC/V/T/ATOM series can be used without driver)

PinMap:

LCD & TF card

LCD ：320x240 TF card Maximum size 16GB

ESP32 Chip	GPIO38	GPIO23	GPIO18	GPIO5	GPIO15
AXP192 Chip						AXP_IO4	AXP_DC3	AXP_LDO2
ILI9342C	MISO	MOS1	SCK	CS	DC	RST	BL	PWR

ESP32 Chip	GPIO38	GPIO23	GPIO18	GPIO4
TF Card	MISO	MOS1	SCK	CS

CAP.TOUCH:

ESP32 chip	GPIO21	GPIO22	GPIO39
AXP192				AXP_IO4
FT6336U	SDA	SCL	INT	RST

Mic & NS4168:

ESP32 Chip	GPIO12	GPIO0	GPIO2	AXP_IO2	GPIO34
NS4168	BCLK	LRCK	DATA	SPK_EN
Mic		CLK			DATA

AXP Power Indicator Light:

AXP192	AXP_IO1	AXP_LDO3
Green LED	Vcc
Vibration motor		Vcc

RTC:

ESP32 Chip	GPIO21	GPIO22
AXP192			AXP_PWR
BM8563	SDA	SCL	INT

IMU(3-axis gyroscope & 3-axis accelerometer):

ESP32 Chip	GPIO21	GPIO22
MPU6886	SDA	SCL

USB to serial chip:

ESP32 Chip	GPIO1	GPIO3
CP2104	RXD	TXD

Internal I2C connection:

ESP32 Chip	GPIO21	GPIO22
MPU6886	SDA	SCL
AXP192	SDA	SCL
BM8563	SDA	SCL
FT6336U	SDA	SCL

M5PORT EXPLAIN:

PORT	PIN	Note:
PORT-A(Red)	G32/33	I2C

ESP32 ADC/DAC:

ADC1	ADC2	DAC1	DAC2
8 channels	10 channels	2 channels	2 channels
G32-39	G0/2/4/12-15/25-27	G25	G26

Specification:

Resources	Parameter
ESP32-D0WD-V3	240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
Flash	16MB
PSRAM	8MB
Input Voltage	5V @ 500mA
Interface	TypeC x 1, GROVE(I2C+I/0+UART) x 1
IPS LCD Screen	2.0"@320*240 ILI9342C
Touch Screen	FT6336U
Speaker	1W-0928
LED	Green power indicator light
Button	Power button, RST button, Virtual screen button*3
Vibration reminder	Vibration motor
MIC	SPM1423
I2S Power Amplifier	NS4168
6-axis IMU	MPU6886
RTC	BM8563
PMU	AXP192
USB Chip	CP2104
DC-DC Boost	SY7088
TF card slot	16G Max.
Lithium Battery	390mAh @ 3.7V
Antenna	2.4G 3D antenna
Operating temperature	32°F to 104°F ( 0°C to 40°C )
Net Weight	52g
Gross Weight	70g
Product Size	54 x 54 x 16mm
Package Size	75 x 60 x 20mm
Case Material	Plastic ( PC )

Reviews (29)
comment

Q & A

: Where is the origin of Elecbee products? Are they certificated?

2023-03-03

Answer:

Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.

2023-03-03

: What forms of payment do you accept?

2023-03-03

Answer:

Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.

2023-03-03

: When will you arrange shipment?

2023-03-03

Answer:

After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.

2023-03-03

: How to exchange or return?

2023-03-03

Answer:

1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.

2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;

3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.

2023-03-03