Description:
Model: T.V53.03 (Update from December 25, 2019)
Model: T.SK106A.03 (Update from September 1, 2020)
Update Model: T.SK105A.03 (Update from November, 2020) The specific model is mainly based on the received model, pay attention to burning the corresponding model firmware.
Input Interface: PC / HD / TV / USB multimedia playing (Note: TV signals can only receive analog signals, not digital signals.)
Voltage: Single 12 V
Screen interface: LVDS Single 6 / 8 , Double 6 / 8
Screen voltage: 3.3V / 5V / 12V
Notice:
1. The power requirement of 12V4A
2. Screen voltage jump line according to the working voltage of screen jump to the corresponding position
3. Use to adapt to the board of general screen line4. The screen line not to reverse and dislocation
How to know the lvds cable type?
Step 1: Find your LCD model's resolution (you can check the resolution from this link: )
Step 2: Click here >>><<< to find the corresponding model.
Step 3: Find and write in the corresponding firmware.
Programming:
1. Put the firmware in formatted USB flash disk(FAT32), then insert the USB disk and the 7KEY-Button to the board
2. After turn on the power, the light of the 7key button be Red then flash red faster.
IT KEEPS flashing and NEVER STOP. it's normal, just wait about 1 minute, it means upgrade has finished. then power off and pull off the u-disk. (Note that write programs do not power outages, crashing won't be able to use)
Q&A:
Q1: T.SK105A.03 chip, 1280*800 resolution, after installing the firmware, the screen flickers
A2: Download this software and re-upgrade. If your 105 chip is unable to be upgraded, you can change the upgrade name to "UTS6710_sos" to force the upgrade. >>>https://img.elecbee.com/eb/download/rar/20210202043110UTS6710.rar<<<
Q2: Does eDP connector work with this item?
A2: The eDP interface is not directly compatible. There are two solution:1): Use this product and purchase an eDP conversion board separately.>>>Click here to buy<<<
2): Buy the EDP driver board directly. >>>Click here to buy<<<
Q3: The remote control can not work?
A3: You must first burn the software to use the remote control.
Description:
Model: T.V53.03 (Update from December 25, 2019)
Model: T.SK106A.03 (Update from September 1, 2020)
Update Model: T.SK105A.03 (Update from November, 2020) The specific model is mainly based on the received model, pay attention to burning the corresponding model firmware.
Input Interface: PC / HD / TV / USB multimedia playing (Note: TV signals can only receive analog signals, not digital signals.)
Voltage: Single 12 V
Screen interface: LVDS Single 6 / 8 , Double 6 / 8
Screen voltage: 3.3V / 5V / 12V
Notice:
1. The power requirement of 12V4A
2. Screen voltage jump line according to the working voltage of screen jump to the corresponding position
3. Use to adapt to the board of general screen line4. The screen line not to reverse and dislocation
How to know the lvds cable type?
Step 1: Find your LCD model's resolution (you can check the resolution from this link: )
Step 2: Click here >>><<< to find the corresponding model.
Step 3: Find and write in the corresponding firmware.
Programming:
1. Put the firmware in formatted USB flash disk(FAT32), then insert the USB disk and the 7KEY-Button to the board
2. After turn on the power, the light of the 7key button be Red then flash red faster.
IT KEEPS flashing and NEVER STOP. it's normal, just wait about 1 minute, it means upgrade has finished. then power off and pull off the u-disk. (Note that write programs do not power outages, crashing won't be able to use)
Q&A:
Q1: T.SK105A.03 chip, 1280*800 resolution, after installing the firmware, the screen flickers
A2: Download this software and re-upgrade. If your 105 chip is unable to be upgraded, you can change the upgrade name to "UTS6710_sos" to force the upgrade. >>>https://img.elecbee.com/eb/download/rar/20210202043110UTS6710.rar<<<
Q2: Does eDP connector work with this item?
A2: The eDP interface is not directly compatible. There are two solution:1): Use this product and purchase an eDP conversion board separately.>>>Click here to buy<<<
2): Buy the EDP driver board directly. >>>Click here to buy<<<
Q3: The remote control can not work?
A3: You must first burn the software to use the remote control.
1 x Controller Board
1 x Remote control
1 x IR
