Hardware Specifications:
Chipset |
ESP32, dual-core MCU, PMU power management |
FLASH |
QSPI flash 16MB |
SRAM |
520 kB SRAM / PSRAM 8MB |
Button |
power key , IO36 |
Extended function |
|
USB to TTL |
CP2104 |
Modular interface |
UART, SPI, SDIO, I2C, LED PWM , PWM, I2S, IRGPIO, capacitor touch sensor, ADC, DACLNA |
On-board clock |
40MHz crystal oscillator |
Working voltage |
2.7V-3.6V |
Working current |
about 70mA |
Sleep current |
about 3mA |
Working temperature |
-40℃ ~ +85℃ |
Size & Weight |
46.47 x 43 x 20.4mm 43.19g |
Display |
1.54 inch LCD capacitive touch screen |
Sensor |
BMA423 three accelerometer, built-in step counting algorithm, activity recognition / tracking, advanced gesture recognition. |
RTC clock |
PCF8563 |
Power Supply Specifications:
Power Supply |
USB 5V/1A |
Charging current |
500mA |
Battery |
3.7V lithium battery |
Wi-Fi:
Standard |
FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC |
Protocol |
802.11 b/g/n(802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4μS Protection interval |
Frequency |
2.4GHz~2.5GHz(2400M~2483.5M) |
Transmit Power |
22dBm |
Communication distance |
300m |
Bluetooth |
|
Protocol |
meet bluetooth V4.2 BR/EDR and BLE standard |
Radio frequency |
with -97dBm sensitivity NZIF receiver Class-1,Class-2&Class-3 emitter AFH |
Audio frequency |
CVSD&SBC audio frequency |
Software Specifications:
Wi-Fi Mode |
Station/SoftAP/SoftAP+Station/P2P |
Security mechanism |
WPA/WPA2/WPA2-Enterprise/WPS |
Encryption Type |
AES/RSA/ECC/SHA |
Firmware upgrade |
UART download/OTA (Through network/host to download and write firmware) |
Software Development |
Support cloud server development /SDK for user firmware development |
Networking protocol |
IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT |
User Configuration |
AT + Instruction set, cloud server, android/iOSapp |
OS |
FreeRTOS |
Appearance Specifications:
T-Watch onboard:
1.54 inch LCD capacitive touch screen: ST7789V
Touch screen chip: FT5206
Accelerometer: BMA423
PMU power management: AXP202
RTC clock module: PCF8563
Expand the interface:
Support microphone: MSM261S4030H0
Support SPI TF memory card
2 digital I/Os: GPIO25, GPIO26 (supports ADC, DAC)
Support I2C, UART, SPI communication protocol
Product Details:
Accelerometer:
• Chip: BMA423
• Latest generation triaxial, low-g acceleration sensor
• ultra-small
• digital interfaces
• 2-bit digital resolution and embedded intelligence,
• allows low-noise measurement of accelerations in 3 perpendiculars and thus senses wrist tilt, tab/double tab and enables plug ’n’ play step counting especially in wearable devices.
Recommended for:
- Step-counting in wearable devices
- Wake up display on wrist tilt
- Low power user interaction by tab/double tab
- Advanced gesture recognition
- Activity recognition/tracking
- Advanced power management
- Tilt compensation for electronic compass
Expansion board introduction:
TTGO T-Watch Baisc is an ESP32-based programmable watch kit consisting of a core PCB and a Baisc backplane. We have introduced a range of functional backplanes that make T-Watch full of possibilities and can be used for a wider range of programming.
1. T-Watch SIM800L Bottom PCB Board
Features:
Development platform: ESP-IDF (native SDK), , Lua, MicroPython, Scratch
Support SIM card mobile communication function
Support microphone
Support voice
Support for scalable module use
ESP32 |
Characteristic |
Description |
GPIO05 |
CS |
Screen, TFT_CS |
GPIO18 |
SCLK |
Screen, TFT_SCLK |
GPIO19 |
MOSI |
Screen, TFT_MOSI |
GPIO27 |
DC |
Screen, TFT_DC |
GPIO12 |
BL |
Screen, TFT_BL |
ESP32 |
Characteristic |
Description |
GPIO33 |
TX |
SIM Card, UART_SIM_TX |
GPIO34 |
RX |
SIM Card, UART_SIM_RX |
GPIO14 |
RST |
SIM Card, SIM_RST |
GPIO15 |
PWKEY |
SIM Card, SIM_PWKEY |
GPIO04 |
BOOST |
SIM Card, SIM_BOOST_CTRL |
2. T-watch Touch Sensor Controller MPR121 PCB Expansion Board (This item)Feature:
Support for reading and writing TF card
Support for the use of extensible modules
ESP32 |
Characteristic |
Description |
GPIO05 |
CS |
Screen, TFT_CS |
GPIO18 |
SCLK |
Screen, TFT_SCLK |
GPIO19 |
MOSI |
Screen, TFT_MOSI |
GPIO27 |
DC |
Screen, TFT_DC |
GPIO12 |
BL |
Screen, TFT_BL |
GPIO13 |
CS |
TF_CS |
GPIO15 |
MOSI |
TF_MOSI |
GPIO02 |
MISO |
TF_MISO |
GPIO14 |
SCLK |
TF_SCLK |
3. T-Watch GPS-M8N Bottom PCB Board
Feature:
GPS positioning function: latitude and longitude, collecting altitude data
Support for reading and writing TF card
Support module expansion
ESP32 |
Characteristic |
Description |
GPIO05 |
CS |
Screen, TFT_CS |
GPIO18 |
SCLK |
Screen, TFT_SCLK |
GPIO19 |
MOSI |
Screen, TFT_MOSI |
GPIO27 |
DC |
Screen, TFT_DC |
GPIO12 |
BL |
Screen, TFT_BL |
GPIO13 |
CS |
TF_CS |
GPIO15 |
MOSI |
TF_MOSI |
GPIO02 |
MISO |
TF_MISO |
GPIO14 |
SCLK |
TF_SCLK |
GPIO33 |
TX |
UART_GPS_TX |
GPIO34 |
RX |
UART_GPS_RX |
4. T-Watch GPS+Lora(S76G) Bottom PCB Board Feature:
Development platform: ESP-IDF (native SDK), , Lua, MicroPython, Scratch
Support GPS function
Support Lora transmission
Support for expandable module use
ESP32 |
Characteristic |
Description |
GPIO05 |
CS |
Screen, TFT_CS |
GPIO18 |
SCLK |
Screen, TFT_SCLK |
GPIO19 |
MOSI |
Screen, TFT_MOSI |
GPIO27 |
DC |
Screen, TFT_DC |
GPIO12 |
BL |
Screen, TFT_BL |
GPIO33 |
TX |
UART_GPS_TX |
GPIO34 |
RX |
UART_GPS_RX |
5. T-Watch Vibration Motor and DAC Output Horn Bottom PCB Board Feature:
Development platform: ESP-IDF (native SDK), , Lua, MicroPython, Scratch
Accept heart rate and detect oxygen in the blood
Support for reading and writing TF card
Support for the use of extensible modules