5pcs JDY-10M 4.0 bluetooth Module Master-Slave Support MESH Networking App Transmission

Product introduction:

The JDY-10 transmission module is a bluetooth 4 protocol standard, the working band is 2. 4GHZ range, the modulation mode is GFSK, the maximum transmission power is 8dB, the maximum transmission distance is 50 meters. It has the characteristics of low power consumption, small size, strong signal, stable data transmission and so on.
 
Product features:
 
1: supports the transmission of Android and IOS mobile phones.
2: Supports one-to-many, many-to-one, many-to-many data transmission and control.
3: Supporting network LED lamp (26 scenario mode, panel mode), brightness, white light, adjustable speed.
4: Supports networking GPIO control (one-to-many, many-to-one, many-to-many).
5: can be certified by FCC/CR and other standard.
6: Supporting networked remote control (ultra-low power consumption), two dry batteries can be used for at least one year.
7: support network 4 way PWM control.
8: The maximum number of 8: networks is 255.
9: supports broadcast and unicast MESH to send data.
10: supports BLE master-slave operation without master-slave switching.
11: at least 60% of the smart home application JDY-10M can be competent.
 
Product application scope:
 
1: bluetooth networking LED lights (one to many, many to one, mobile phone or remote control, many to many control ).
2: bluetooth network motor pulling applications (one to many, many to one, machine or remote control, many to many control).
3: network panel switch, 86 switch (ultra-low power consumption).
4: network smart home application (control, relays, curtains) control.
5: networking sensor Application of network gateway of.
6: Application of network gateway of WIFI.
7: Application of Zigbeel network.
8: Application of mobile phone network control.
 
Technical specifications:
 

 
Pin function description:

 
AT instruction set:
 
The user can communicate through the serial port and the bluetooth chip. The serial port uses Tx, Rx two signal lines, and the baud rate supports 48009600, 19200.38400, 57600115200. The default baud rate of the serial port is 115200bps.
Detailed description of the AT instruction set.
(Note: the AT instruction must return to the line, the AT instruction can only take effect when the module is unconnected. Once the bluetooth module is connected to the mobile phone, the bluetooth module enters the data transmission mode) only for the feature UUID: FFEI, and MFSH can communicate with the instruction via the characteristic UUID: FFE2. Of course the serial port is connected to the state. You need to issue the AT command to send the AT instruction (including the MESH instruction) by pulling the PWRC pin low.
(AT instruction is small and case sensitive, all in return, line end: rn, pay special attention to the computer serial tool hair terminator, do not need to input rn, only need to check the send back to the line.
 
Inquiry - version number:
 

 
Check - bluetooth MAC address:
 

 
Reset - soft reset:

 
Set / query - bluetooth name:
 

 
Set / query - serial port baud rate:
 

 
Setup / check - device type:
 

 
Set off - disconnect connection:
 

 
Set up / query - Networking ID:
 

 
Set / query - short address of networking:
 

 
Setting / checking the -APP connection password:
 

 
Set / check a APP cipher connection switch:
 

 
Set / check - the short address of the key switch:
 

 
The number of serial ports MKSH is transmitted :(one to many, many to one, many to many)

Serial MKSH data receiving:
 

 
Serial port MESH function data: (one to many, many to one, many to many)
 

I0 MESH Level control:
 

5 x JDY-10M 4 bluetooth Module Master-Slave Support MESH Networking App Transmission