NRF24LE1 Wireless Transmission Module NRF24L01+ 51MCU Single Chip with MCU

NRF24LE1 Wireless Transmission Module NRF24L01+ 51MCU Single Chip with MCU

Name: NRF24LE1 Wireless Transmission Module NRF24L01+ 51MCU Single Chip with MCU
Brand: Elecbee
SKU: EB0047464
Price: 6.47 USD
Availability: InStock

$10,89

SKU: EB0047464

Copy to clipboard

88 Sales

0 reviews

In Stock Availability

Orders under $800 , tax included.（U.S. only)

Bulk Purchase, Auto Savings:

$6.15

10-19 PCS

$5.82

20-99 PCS

$5.18

100+ PCS

Deliver to United States

Flat Shipping Rate $10.00

- +

• 16 kB program memory (on-chip Flash)

• 1 kB data memory (on-chip RAM)

• 1 kB NV data memory

• 512 bytes NV data memory

• AES encryption HW accelerator

• 16-32bit multiplication/division co-processor (MDU)

• High flexibility IOs

• Support for HW debugger

• Serves a set of power modes from ultra low power to a power-efficient active mode

Integrated SPI, IIC, UART, 6-12 bit ADC 14 channels, 2 PWM, Watchdog, on-chip oscillator, analog comparator, 3 timer/counters, random number generator, RTC, 18 interrupt sources

Precautions:

The wireless module is a static-sensitive device. Pay attention to the static electricity protection when using it. Especially in the dry winter, try not to remove the device on the touch module to avoid unnecessary damage.

The wireless module recommends using a DC power supply with a small ripple, and the operating voltage is recommended to operate at 3.3V.

The grounding of the module should be stable and reliable, and the ground wire should be as close as possible to the power supply. If you use a switching power supply, you must strengthen the retraction to avoid the ripple and spikes of the switching power supply affecting the operating characteristics of the module.

The module uses a PCB antenna. This antenna is easily affected by external circuits. When using it, please do not leave the line or place the device under and around the antenna. If possible, it is best to hollow out. The 2.4G frequency is relatively high, and various materials have certain influences. The general plastic has little effect. If there is a metal object, it will have a significant impact. In this case, it is recommended to use an SMA feeder to connect the SMA antenna.

PIN	PIN NAME	PIN FUNCTIONS
1	REST	Reset
2	P1.4
3	P1.3
4	P1.2
5	P1.1
6	P1.0
7	P0.7
8	P0.6
9	P0.5
10	P0.4
11	P0.3
12	PROG
13	P0.2
14	P0.1
15	P0.0
16	P1.6
17	P1.5
18	VCC	Power Input
19,20	GND	Power Ground

Contact Sales

NRF24LE1 Wireless Transmission Module NRF24L01+ 51MCU Single Chip with MCU

EB0047464

Your Name*
Your Email*
Topic*
Qty
Message	Message
SUBMIT

Tags: Wireless Module

Pay with Ease

Trusted Delivery

Mobile

Description

• Onboard 2.4G PCB antenna, ISM band, 1.27mm in-line, compact size for easy embedded applications.

• Supports six channels of data reception (one pair of six)

• Working method: half duplex

• Supports general modulation methods such as GFSK/FSK

• Supports 2Mbps/1Mbps/250Kbps data rate, and can set different transmit power

• Multi-frequency point: 126 frequency point, meeting the needs of multi-point communication and frequency hopping communication, 2400MHz~2525MHz, 1MHz frequency hopping stepping, channel switching time is about 130us

• Internally integrated high PSRR LDO

• Wide supply voltage: 1.9~3.6V, typical 3.3V

• Average emission current as low as 11.3mA (0dBm)

• Receive current: about 13mA@2Mbps

• Emission current: approx. 11 mA@0dBm

• Deep sleep: 0.5uA

• MCU current: 3.8mA@8MHzclock

• Built-in Enhanced ShockBurstTM baseband protocol engine

• Transceiver data hardware interrupt output

• Support 1bit RSSI output

• Operating temperature: -20 ° C ~ 60 ° C

• The best transmission distance: at an open rate of 2MBPS, up to about 50 meters

Chip internal MCU

1 x Wireless module

NRF24LE1-Wireless-Transmission-Module-NRF24L01-51MCU-Single-Chip-with-MCU-1535051

• Onboard 2.4G PCB antenna, ISM band, 1.27mm in-line, compact size for easy embedded applications.

• Supports six channels of data reception (one pair of six)

• Working method: half duplex

• Supports general modulation methods such as GFSK/FSK

• Supports 2Mbps/1Mbps/250Kbps data rate, and can set different transmit power

• Internally integrated high PSRR LDO

• Wide supply voltage: 1.9~3.6V, typical 3.3V

• Average emission current as low as 11.3mA (0dBm)

• Receive current: about 13mA@2Mbps

• Emission current: approx. 11 mA@0dBm

• Deep sleep: 0.5uA

• MCU current: 3.8mA@8MHzclock

• Built-in Enhanced ShockBurstTM baseband protocol engine

• Transceiver data hardware interrupt output

• Support 1bit RSSI output

• Operating temperature: -20 ° C ~ 60 ° C

• The best transmission distance: at an open rate of 2MBPS, up to about 50 meters

Chip internal MCU

Reviews (0)
comment

There are no reviews for this product.

Download

20190723015409XL24LE1-D01

Q & A

: Where is the origin of Elecbee products? Are they certificated?

2023-03-03

Answer:

Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.

2023-03-03

: What forms of payment do you accept?

2023-03-03

Answer:

Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.

2023-03-03

: When will you arrange shipment?

2023-03-03

Answer:

After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.

2023-03-03

: How to exchange or return?

2023-03-03

Answer:

1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.

2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;

3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.

2023-03-03