YYS-4 3 Channel Programmable Relay Control Module Trigger Delay/Timer/Self-latching/Interlock Switch

YYS-4 3 Channel Programmable Relay Control Module Trigger Delay/Timer/Self-latching/Interlock Switch

Name: YYS-4 3 Channel Programmable Relay Control Module Trigger Delay/Timer/Self-latching/Interlock Switch
Brand: Elecbee
SKU: EB0045775
Price: 20.43 USD
Availability: InStock

$20.43

SKU: EB0045775

Copy to clipboard

86 Sales

0 reviews

In Stock Availability

Bulk Purchase, Auto Savings:

$19.41

10-19 PCS

$18.39

20-99 PCS

$16.34

100+ PCS

Deliver to United States

Flat Shipping Rate $10.00

- +

- This programmable control board is designed with 3-channel relays.

- It supports time delay/interlock/self-latching/sequential starting.

- The module is powerful and convenient to operate.

- There are six kinds of commonly used functions to meet the demand of more applications.

- It can be used to control solenoid valves, pumps, motors, light belt, etc.

Specification:

Model: YYS-4

Input voltage: DC/AC 7V~30V

Output power: Can control DC or AC loads within 5A

Time range: Adjustable from 0.1 seconds to 999 minutes

Wiring:

1. AC/DC: Input power supply DC/AC 7V~30V

2. IN1: Signal input 1 (negative trigger)

3. IN2: Signal input 2 (negative trigger)

4. IN3: Signal input 3 (negative trigger)

5. NO: relay normally open interface, relay are disconnected before energized, and connected to COM after energized.

6. COM: relay COM interface

7. NC: relay normally closed interface, connected to COM before relay is energized, and disconnected after relay is energized.

Functions:

Function can be set freely by user;Set parameters can be saved after power failure.

P--1: send signal 1, relay 1 is energized till A time automatically stop;

send signal 2, relay 2 is energized till B time automatically stop;

send signal 3, relay 3 is energized till C time automatically stop;

There is only one relay at work at the same time.

P--2: send signal 1, relay 1 is energized till A time automatic stop, then relay 2 is energized till B time stop, then relay 3 is energized till C time stop;Send signal 1 again, repeat the former action.

Send signal 2, relay 1 is energized till A time automatic stop, then relay 2 is energized till B time stop, then relay 3 is energized till C time stop;then relay 1 is energized till A time stop...an infinite cycle.

Send signal 3, relay 1 is energized for 100ms then stop, wait A time; relay 2 is energized for 100ms then stop, wait B time; relay 3 is energized for 100ms then stop, wait C time; relay 3 is energized for 100ms then stop, wait A time; relay 1 is energized for 100ms then stop... an infinite cycle.

P--3: After powered on, relay 1 is energized for A time then stop, wait C time;relay 2 is energized for B time then stop, wait C time;Relay 1 and relay 2 work in turn;During the period of relay 1 and relay 2 are energized, relay 3 stops;During the period of relay 1 and relay 2 are de-energized,relay 3 is energized;

P--4: send signal 1, relay 1 will be energized after a delay of A time, then relay 2 will be energized after a delay of B time, and then relay 3 will be energized after a delay of C time;

send signal 2, relay 1 will be de-energized after a delay of A time, then relay 2 will be de-energized after a delay of B time, and then relay 3 will be de-energized after a delay of C time;

send signal 3, emergency reset signal;

P--5: send signal 1, relay 1 would work;send signal 1 again, relay stops; sending signal 2, 3 is respectively corresponding to each relay action; 3 channels are independent from each other.

P--6: send a signal 1, relay would work, while other relays stop;send signal 1 again, relay stops;sending signal 2, 3 is respectively corresponding to each relay action;There is only one relay at work at the same time.

Button setting instructions:

After powered on, it shows "----" to enter standby state;

press K1,

screen display: P--1: K2 and K3 adjust mode

Press K1 again, screen display: A001: K2 and K3 adjust the first time A, K4 adjust decimal point (time units)

Press K1 for the third time, screen display:B001: K2 and K3 adjust the second time B, K4 adjust decimal point (time units)

Press K1 for the forth time, screen display:C001: K2 and K3 adjust the third time C, K4 adjust decimal point (time units)

Press K1 for the fifth time, it shows "----" to enter standby state;

Decimal point and unit of time:

XX.X: The decimal point in the "tens" position, timing range: 0.1 seconds ~ 99.9 seconds.

XXX: No decimal point, timing range: 1 second~9999 seconds.

XXX.: The decimal point in the units position, timing range:1 minute ~ 999 minutes.

Contact Sales

YYS-4 3 Channel Programmable Relay Control Module Trigger Delay/Timer/Self-latching/Interlock Switch

EB0045775

Your Name*
Your Email*
Topic*
Qty
Message	Message
SUBMIT

Tags: Relay

Pay with Ease

Trusted Delivery

Mobile

Description

1 x YYS-4 3 Channel Programmable Relay Control Module

YYS-4-3-Channel-Programmable-Relay-Control-Module-Trigger-DelayTimerSelf-latchingInterlock-Switch-Re-1623641

Reviews (0)
comment

Q & A

: Where is the origin of Elecbee products? Are they certificated?

2023-03-03

Answer:

Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.

2023-03-03

: What forms of payment do you accept?

2023-03-03

Answer:

Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.

2023-03-03

: When will you arrange shipment?

2023-03-03

Answer:

After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.

2023-03-03

: How to exchange or return?

2023-03-03

Answer:

1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.

2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;

3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.

2023-03-03