XH-M453 Dual Digital Display Temperature Humidity Controller Thermostat Humidity Smart Thermostat Incubator Control AC 220V / DC12-24V

XH-M453 Dual Digital Display Temperature Humidity Controller Thermostat Humidity Smart Thermostat Incubator Control AC 220V / DC12-24V

Name: XH-M453 Dual Digital Display Temperature Humidity Controller Thermostat Humidity Smart Thermostat Incubator Control AC 220V / DC12-24V
Brand: Elecbee
SKU: EB0046915
Price: 17.99 USD
Availability: InStock
Rating: 135 / 29 (29 reviews)

$17.99

SKU: EB0046915

Copy to clipboard

83 Sales

29 reviews

In Stock Availability

Bulk Purchase, Auto Savings:

$17.09

10-19 PCS

$15.38

20-99 PCS

$12.30

100+ PCS

Deliver to United States

Flat Shipping Rate $10.00

Voltage

- +

Contact Sales

XH-M453 Dual Digital Display Temperature Humidity Controller Thermostat Humidity Smart Thermostat Incubator Control AC 220V / DC12-24V

EB0046915

Your Name*
Your Email*
Topic*
Qty
Message	Message
SUBMIT

Pay with Ease

Trusted Delivery

Mobile

Description

Voltage: 220V - 240V,DC 12V,DC 24V

Measure type: Temperature measurement,Humidity measurement

Precise details>>

Precise details:

Specifications:

Product model: XH-M453

Product specifications: DC12~24V/AC220V

Temperature range: -20~60°C

Humidity range: 0~100%RH

Control accuracy: ±0.1 °C / 0.2%

Detection probe: integrated sensor

Output type: relay output

Output capacity: up to 10A

Product weight: about 150g

Appearance size: 105*75*38mm

Embedded hole: 81*57mm

1 x XH-M453 Dual Digital Display Temperature Humidity Controller

1 x Sensor Cable

User Manal:

1. Connect the power supply and temperature control humidity equipment correctly according to the wiring diagram. Pay attention to the temperature control and humidity control equipment. Do not connect the wrong ones. When connecting the DC12~24V power supply, distinguish the positive and negative poles. AC220V does not divide the zero fire line.

2. Stop the temperature setting

Press the SET button. When the red screen number starts to flash, press the up and down buttons to adjust the desired stop temperature. After setting, wait for 10 seconds without waiting for the system to automatically save the data.

3. Heating or cooling mode setting

Press and hold the up key, when the red screen displays C-0, press the setting button to enter the C-0 mode setting.

The down button switches between blue screens L and H, where L stands for heating and H stands for cooling. (Note: L when you pick up

The temperature-controlled load must be a heating device. When H, the load you connect must be a cooling device. ) set well

Wait 10 seconds, the system automatically saves the data.

4. Temperature difference setting

Press and hold the up key, when the red screen displays C-0, press the up and down keys to switch to the C-1 temperature difference setting, and then press

Set the temperature to the temperature difference setting, then press the up and down keys to adjust the temperature difference you want; set

Wait 10 seconds, the system automatically saves the data. (If the stop temperature is set to 35 ° C, the mode is set to L plus

In the hot mode, the temperature difference is set to 5, and the starting temperature is 35-5=30°C, and the temperature control range is between 30~35°C.

On the contrary, if the mode is set to H cooling mode, the starting temperature is 35+5=40°C, and the temperature control range is

Between 35~40°C)

5. Temperature calibration

Press and hold the up key, when the red screen displays C-0, press the up and down keys to switch to the C-2 temperature correction mode, press the set key to enter the calibration mode, and then press the up and down keys to adjust the difference you want. Value; if the actual temperature is 28 ° C, the probe detection temperature is 28.2 ° C, then the correction difference is set to -0.2; if the detection temperature is low, the correction difference can be increased. Wait 10 seconds after setting, the system automatically saves the data.

Temperature parameter code table:

Code Name Setting range Default parameters

C-0 mode setting L heating H cooling L heating mode

C-1 temperature difference 0.1~50° C 2.0°C

C-2 temperature calibration -10 and 10 °C 0.0 °C

6. Stop the temperature setting

Press the SET button, the red screen number starts to flash, and then press the SET button to switch to the blue screen number.

Blink, press the up and down keys to adjust the desired stop humidity value; do not wait after setting 10

In seconds, the system automatically saves the data.

7. Humidification or dehumidification mode setting

Press and hold the key, when the red screen displays H-0, press the setting button to enter the H-0 mode setting.

The down button performs switching between blue screens L and H, L for humidification and H for dehumidification. (Note: L when you pick up

The humidity control load must be a humidification device. When H is used, the load you are connected to must be a dehumidification device. ) set well

Wait 10 seconds, the system automatically saves the data.

8. Humidity difference setting

Press and hold the key, when the red screen displays H-0, press the up and down keys to switch to the H-1 humidity difference setting, press

Press the setting button to enter the humidity difference setting, press the up and down keys to adjust the setting you want, and set it.

Wait 10 seconds, the system automatically saves the data. (If the stop humidity is set to 50% RH, the mode is set to L plus

In wet mode, the humidity difference is set to 5% RH, the starting humidity is 50-5=45%RH, and the humidity control range is between 45~50%RH. On the contrary, if the mode is set to H dehumidification mode, the starting humidity is 50+. 5=55% RH, the humidity control range is between 50~55% RH)

9. Temperature calibration

Press and hold the key, when the red screen displays H-0, press the up and down keys to switch to the H-2 humidity correction mode.

Press the setting button to enter the calibration mode, press the up and down keys to adjust the setting difference; if the actual humidity is 56% RH,

The probe detects a humidity of 56.2% RH, and the correction difference is set to -0.2;

Low, just adjust the correction difference. Wait 10 seconds after setting, the system automatically saves the data.

Humidity parameter code table

Code Name Setting range Default parameters

H-0 mode setting L humidification H dehumidification L humidification mode

H-1 Humidity difference 0.1~50%RH 10%RH

H-2 Humidity Calibration -10 and 10%RH 0.0%RH

10. Restore factory settings

Press and hold the up and down keys for 5 seconds at the same time. When the screen displays 888, the factory will be restored.

Reviews (29)
comment

Q & A

: Where is the origin of Elecbee products? Are they certificated?

2023-03-03

Answer:

Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.

2023-03-03

: What forms of payment do you accept?

2023-03-03

Answer:

Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.

2023-03-03

: When will you arrange shipment?

2023-03-03

Answer:

After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.

2023-03-03

: How to exchange or return?

2023-03-03

Answer:

1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.

2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;

3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.

2023-03-03