HiFi LM3886 TF Mono 68W 4Ω Audio Power Amplifier Board AMP 50W/38W 8Ω
$5.77
SKU: EB0051753
Copy to clipboard
98 Sales
0 reviews
In Stock Availability
Bulk Purchase, Auto Savings:
$8.72
10-19 PCS
$8.26
20-99 PCS
$7.34
100+ PCS
Deliver to United States
Flat Shipping Rate $10.00
1. Using double-sided alignment, careful layout, signal input portion away from the output section.
2. Part of the coupling capacitors for longer minimum pad 5mm, the maximum suitable for the capacitor of 25mm.
3. The input section added high pass circuit, making the board more stable!
4. The output part RL circuit (inductance and resistance in parallel) effective protection chip, effectively preventing the induced electromotive force shutdown speaker damage to the chip!
5. The board use a DC power supply, voltage range: ±16 to ±36, recommented ±32V.
6. PCB size: 74 x 50 x 1.6mm
Installation note:
1. The amplifier board can not be directly connected to a transformer output connected to the power supply board first, and then to the power supply part of the board from the power board output, pay attention to positive and negative level not be wrong!
2. The plate use DC power supply, speaker output impedance smaller current increases, the greater the heat, it is recommended when the speaker is 4Ω, the voltage suggested the use of ± 28V (transformer dual 21V), the speaker of 8Ω voltage ± 32V (transformer dual 24V), the highest possible ± 35V (transformer dual 28V), but pay attention to the local grid voltage is stable, it is recommended not to use.
3. When the power test, the signal input on the board to take the load, can not be vacant, otherwise there will be induction noise, the signal line to make use of shielded cable.
4. Be sure that the board chassis of the housing is connected to the input ground, backward input GND do not need to connect the housing.
5. The board is Mono channel, stereo need 2 piece, you can also assemble multichannel accocding to your own needs.
Package include:
1 x HiFi LM3886 TF Stereo Amplifier AMP Assembled Board