EB-JQB-G-O2 Pipeline corridor stationary oxygen detector 0-30%
Features:
1. Meet the measurement and control of various environmental parameters
2. Complete range of products to meet various on-site requirements
3. Industrial-grade design, stable performance and strong anti-interference ability
4. Integrated design, beautiful appearance, various installation forms
5. Large-scale production, stable quality, and good product interchangeability
Contact Sales
![](image/catalog/Tool/Transmitter/EB-JQB-G.jpg)
Your Name* | |
Your Email* | |
Topic* | |
Qty | |
Message | |
SUBMIT |
![Trusted Delivery Image](/image/catalog/Group_12880628.png?v=1692857580)
- Description
Gas transmitters consist of an enclosure, sensor, and electronics that convert a signal from a gas sensor into an analog output signal. Electrical outputs for gas transmitters include analog current, analog voltage, and frequency. Analog current levels such as 4 – 20 mA are suitable for sending signals over long distances. Typically, a current is imposed on the output circuit proportional to the measurement. Feedback is used to provide the appropriate current regardless of line noise and impedance. Analog voltage outputs are simple, usually linear functions of the measurement. Frequency or modulated frequency outputs for gas transmitters include amplitude modulation (AM), frequency modulation (FM), sine waves, and pulse trains.
Gas transmitters differ in terms of the number of gases sensed, general gas types, and specific gas types. Suppliers rate products for two general types of gases: toxic gases and combustible gases. Toxic gases cause illness or death when inhaled or absorbed by the body in relatively small quantities. Combustible gases react with air or oxygen and burn over a wide range of concentrations. Within each category, there are many specific types of gases.
Gas transmitters include an analog or digital display and offer a variety of features. Some gas transmitters include audible or visual alarms, interchangeable probes, on-board data storage, a sampling pump, or a sensor array. Others are intrinsically safe (IS) or designed for use in a hazardous environment. Intrinsically safe (IS) is an adjective for equipment and wiring which is incapable of releasing sufficient electrical or thermal energy under normal or abnormal conditions to cause ignition of a specific hazardous atmospheric mixture in its most ignited concentration. IS terminations and wiring may be brought into any hazardous location of any group classification for which it is accepted, without requiring explosion-proof housing or other means of protection.
Technical Parameters:
Model No. | EB-JQB-G |
Measuring Range | O₂:0-30%Vol, EX:0-100%LEL, CO:0-500ppm, H₂S:0- 100ppm, temperature: -40~80℃, humidity: 0-100%RH; |
Detect Gas | O₂, EX, CO, H₂, temperature, humidity |
Detection Principle | Catalytic combustion, electrochemistry principles |
Detection Method | Diffusion type, pipeline type, flow type. Fixed online continuous detection; |
Resolution | O₂:0.1%Vol、EX:1%LEL、CO:1ppm、H₂S:1ppm |
Accuracy | ≤±3% (actual concentration, higher accuracy requirements are determined according to sensor performance) |
Operation Method | Infrared remote control for long and short distance operation, easy to set up |
Repeatability | ≤±1% |
Zero Drift | ≤±1% (F.S/year) |
Response Time | ≤20 seconds (T90) T90 depends on sensor characteristics |
Recovery Time | ≤20 seconds (T90-T10 depends on sensor characteristics) |
Explosion-proof Signs | Exd II CT6 Gb(-40℃~60℃) |
Output Form | Users can determine according to the actual site environment requirements, and the longest transmission distance is 2000 meters (single core 1 square meter shielded cable) Three-wire 4-20mA current signal output, can be connected to alarm controller, PLC, DCS and other control systems (standard configuration) Digital signal RS485 output, ModBus RTU communication protocol (optional function) Frequency signal 200~1000Hz output (optional function) One set of passive output, one set of active output (simultaneous control), passive electric shock capacity 220VAC 0.5A or 5VDC 0.5A Wireless transmission: no distance limit, built-in module, transmitted through mobile, China Unicom or telecommunications signals, with SMS reminder notification function (optional); |
The Main Material | Shell: ADC12 aluminum alloy, strong, wear-resistant and corrosion-resistant (optional 316 stainless steel shell) Air chamber: Made of high-strength, wear-resistant and corrosion-resistant aluminum profiles, sturdy and durable (optional 316 stainless steel air chamber) |
Installation Method | Wall-mounted type; pipeline type (split tube type, intubation type, pipeline type external thread Pattern: M45X1.5mm, optional pipe adapter screw joint, weldable) |
Operating Temperature | -40℃~70℃ (ordinary catalytic combustion principle sensor) -40℃~270℃ (special catalytic combustion) -40℃~50℃(electrochemistry) -20℃~50℃ (pid principle sensor) -20℃~50℃ (infrared/fluorescence gas sensor) -40℃~70℃ (thermal conductivity principle sensor) -40℃~750℃ (zirconia principle oxygen sensor) |
Working Humidity | ≤95%RH, no condensation (humidity >90%RH, condensation can be equipped with a filter) |
Relative Humidity | 10%~95%RH |
Visible Distance | ≥10 meters (5.0 vision) |
Direct Reading | Measured value, alarm value |
Operation Method | Remote control + four-button operation |
Operating Mode | There are two operating modes to choose from: user mode and administrator mode. |
Calibration | Target point calibration function, you can set the calibration value and zero with one click |
Power Supply | |
Power Consumption | Electrochemical sensor: P ≤ 1.5W Ordinary catalytic sensor: P ≤ 2.8W Low power consumption catalytic sensor: P ≤ 1.5W Thermal conductivity sensor: P ≤ 2.9W Infrared sensor: P ≤ 3.0W PID sensor: P ≤ 2.8W |
Work Pressure | 0.08MPa~0.6MPa (thermal conductivity principle sensor) 0.02MPa~0.36MPa (zirconia principle oxygen sensor) 86KPa~106KPa (others) |
Alarm Mode | Panel LED alarm; display character flashing and information reminder; 1 set of relay output |
Alarm Point Setting | K1 alarm value, K2 alarm value; can be set by yourself |
Protective Function | Lightning protection and surge protection design, wiring fault-tolerant design, intermittent detection, automatic sensor protection function |
Audible Alarm | Optional sound and light alarm, alarm sound: > 90 decibels |
Size | 180mm*140mm*92mm (height*width*thickness) |
Weight | About 1.6Kg |
Implementation Standards | GB15322.1-2003,GB3836.1-2010,GB3836.2-2010,GB3836.4-2010 |
Certified Product | SIL certification (SIL2, SIL3); ISO9001 |
Standard Accessories | Packing box, manual, certificate, warranty card, factory inspection report Remote control (default is 6 instruments, one remote control is provided, if there are special requirements, it can be provided free of charge), calibration cover (optional) |
Quality Assurance | One-year warranty, free maintenance during the warranty period |
Protection Level | IP66 |
- Reviews (0)
- All(0)
- Q & A
-
: Where is the origin of Elecbee products? Are they certificated?2023-03-03
-
Answer:
Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.
2023-03-03
-
: What forms of payment do you accept?2023-03-03
-
Answer:
Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.
2023-03-03
-
: When will you arrange shipment?2023-03-03
-
Answer:
After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.
2023-03-03
-
: How to exchange or return?2023-03-03
-
Answer:
1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.
2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;
3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.
2023-03-03