2500W 48V 50A ZVS Induction Heating Module High Frequency Heating Machine Melt Metal Coil With Power Supply Full Kit

2500W 48V 50A ZVS Induction Heating Module High Frequency Heating Machine Melt Metal Coil With Power Supply Full Kit

Name: Geekcreit® 2500W 48V 50A ZVS Induction Heating Module High Frequency Heating Machine Melt Metal Coil With Power Supply Full Kit
Brand: Elecbee
SKU: EB0047195
Price: 234.99 USD
Availability: InStock
Rating: 138 / 29 (29 reviews)

$234.99

SKU: EB0047195

Copy to clipboard

88 Sales

29 reviews

In Stock Availability

Bulk Purchase, Auto Savings:

$223.24

10-19 PCS

$200.92

20-99 PCS

$160.74

100+ PCS

Deliver to United States

Flat Shipping Rate $10.00

- +

This induction heating circuit uses a 12-48V low-voltage DC power supply with a maximum current of 50A and a maximum power of 2500W. Continuous operation under conditions of good heat dissipation. Because of its moderate power, it can be used for DIY players to quench, annealing and other heat treatment of small parts. It can also be used with graphite crucible to smelt gold, silver, copper, aluminum and other metals. The heating is even and fast, very convenient.

Physical and electrical parameters:

1. Size: 120*240*85 (unit: mm)

2. Working voltage: 12-50V

3. Maximum working voltage: 48V

4. Maximum working power: 2500W

5. Maximum working current: 50A

Precautions for use:

1. No matter in any case, do not allow no-load power on (no-load refers to the output port without any load). Once the power is turned on by no-load, the board will emit high-frequency noise, which will cause the MOS tube to be completely damaged and cannot be repaired.

2. Please note that when using a switching power supply, because a high-power switching power supply generally has a slow-start function, that is, it slowly rises at the beginning of the output voltage, and if the voltage is turned on to 11V before the induction heating circuit is turned on, the circuit will not vibrate because of insufficient voltage, so that the two MOS tubes are turned on at the same time to burn the components. Therefore, so it is necessary to wait until the switching power supply voltage is stable. Induction heating circuit, an air switch can be connected between the power source and the main board;

3. This circuit has strict requirements on power supply. The 12V power supply must use more than 500W power supply, 24V is greater than 1200W, 36V is greater than 2000W, and 48V is greater than 2600W (recommended working voltage is 48V);

4. No matter what the voltage is used, as long as the operating current is lower than 50A, the circuit will not be burned out. Therefore, a 50A fuse can be added to protect the circuit during high-power operation.

5. It is inevitable that high-power operation heat is generated, so it should be cooled by the top of the fan while working.

6. The working voltage must not be lower than 12V.

7. When the heating machine is working, the heating coil will generate high heat. It is recommended to use water cooling to cool the heating coil to avoid damage to the main board caused by high temperature.

Note: Please note that this power supply is a disassembly power source, not a brand new power source. (New power sources cost at least three times more)

Contact Sales

2500W 48V 50A ZVS Induction Heating Module High Frequency Heating Machine Melt Metal Coil With Power Supply Full Kit

EB0047195

Your Name*
Your Email*
Topic*
Qty
Message	Message
SUBMIT

Tags: Induction Heating Module

Pay with Ease

Trusted Delivery

Mobile

Description

Voltage: 48V

Precise details>>

1 x PCB board

1 x 48V copper tube

1 x Crucible

1 x Water pump water pipe

1 x Air switch

1 x 48V 50A power supply

Please note that installing the coil in reverse may cause damage to the motherboard.

(The appearance is a little inconsistent, for reference only.)

Geekcreitreg-2500W-48V-50A-ZVS-Induction-Heating-Module-High-Frequency-Heating-Machine-Melt-Metal-Co-1449993

Reviews (29)
comment

Q & A

: Where is the origin of Elecbee products? Are they certificated?

2023-03-03

Answer:

Elecbee has long-term cooperation agreements with the OEM factories in China. So that we are able to reduce the intermediate channel cost, and help you save money. Our products are all made strictly according to the relative global standard, to ensure the products have good compatibility and excellent quality.

2023-03-03

: What forms of payment do you accept?

2023-03-03

Answer:

Our main payment methods include Paypal, Credit Cards, Debit Cards, Bank Transfer, and more to discover. Please choose the payment methods in your favor.

2023-03-03

: When will you arrange shipment?

2023-03-03

Answer:

After confirming receipt of your payment. We will arrange the delivery as soon as possible and upload the courier number to the website for you to track.

2023-03-03

: How to exchange or return?

2023-03-03

Answer:

1. You can apply to return within 30 days after receipt of the goods. Please make sure the outside package is intact, and the product is in its original condition. We will arrange your refund according to the relevant provisions once the package is received.

2. Return process: You Apply for a Return - Approve the Return - Arrange a Return - Receive the Products and make Inspection - We arrange a Refund;

3. We will bear the freight charges for returns caused by us, for instance, the quality problem. As to returns caused by the buyer, the buyer should be responsible for the shipping fee.

2023-03-03