315MHz / 433MHz 220V 10A 1CH Channel Wireless Relay Remote Control Switch Receiver - 315MHz

Specification:

1. Input Voltage: AC85V-AC220V

2. RF Frequency: 315/433MHZ

3. RF Working mode:Super heterodyne receiver

4. Receiver Sensitivity: -107dBm

5. Remote Control Distance: >100 meter(In open environment)

6. Decoding Way: MCU Software decoding

7. Can store the number of remote control:32

8. Support remote control type: Fixed code, learning code

9. Channel: 1CH

10 .Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)

11. Wiring Method:Fixed wiring terminal

12. Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC / 10A 28VDC

13. Dimension:5.4cm*3.1cm*1.4cm

Working/output method:

1. Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.

2. Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.

3. Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.

Clear & Learn Code:

1. Clear function - After pressing the "KEY" button 8 times, the LED will go off and release all the remote control data in the memory. When the LED flashes for 5 times, it indicates that the clear function is completed.

2. learning function - click the learning button "KEY", LED indicator light indicates that the microprocessor to enter the learning state of the code, press the matching wireless remote control button, LED light blinks 3 times then turn off means Code success.

3. LED flashes to determine the selected function.

* Flashing 1 time - Jogging function

* Flashing 2 times - Self-locking function

* Blink 3 times - Interlock function

Note:

When using for the first time, make sure to clear the factory code and clear the remote control code.

Package included:

1 x 220V 1 Channel Wireless Relay Switch