准确的细节:
描述:
Working voltage:1.8~3.7V
可接受电流:10~14mA
Transmit current:120mA@+20dBm
90mA@+17dBm
29mA@+13dBm
Operating frequency:868MHz
Transmit power:+20dBm
Receive sensitivity:-139dBm@LoRa &62.5Khz&SF=12&146bps
-136dBm@LoRa &125Khz&SF=12&293bps
-118dBm@LoRa &125Khz&SF=6&9380bps
-123dBm@FSK&5Khz&1.2Kbps
频率误差:+/-15KHz
FIFO space:64Byte
数据速率:1.2K~300Kbps@FSK
0.018K~37.5Kbps@LoRa
Modulation Mode: FSK,GFSK,MSK,GMSK,LoRa TM, OOK
接口形式:SPI
休眠电流:0.2uA@SLEEP
1.5uA@IDLE
工作 温度:-40℃- +85℃
数字RSSI功能
自动频率校正
Automatic gain control
射频唤醒功能
低电压检测和温度传感器
快速唤醒和跳频
高度可配置的数据包处理程序
SMA 天线
IP5306
More product information,go to:https://github.com/LilyGO/TTGO-LoRa32-V2.1
At the TTGO LoRa V2.1, we add the SMA and IP5306 to the board,which make it can do more things.In terms of the power switch, we have changed the switching interaction mode. The added SMA antenna can enhance signal transmission.
套餐包括:
1 xTTGO LoRa32 V2.1868MhzModule
2 xPin
1 xAntenna
1 xPower Cable
(注意:发货清单不包括电池和SD卡)
关于lipo充电电路问题(2018 年 9 月 10 日的重要更新):
V2.1-1.5升级到V2.1-1.6后,经过我们的测试,充电电路上应该使用二极管元件,但是我们使用了保险丝,二极管是单向的,保险丝是双向的。 这会导致 USB 电压直接传递给电池。 长时间唤醒后,电池可能会变热或燃烧,所以不能用这个V2.1-1.6版本给电池充电! ! ! (电池可以用,但电池不能充电)
If you want to use this V2.1-1.6 version to charge the battery, you need to replace the fuse in the figure with a diode (Type:BS5819 SOD123 1A) to use the charging function normally.The following is an upgraded picture.
